FTP and Cycling Power Zones Calculator

Estimate cycling FTP from a 20-minute or ramp test, then see power zones and optional watts per kilogram.

How it works

The 20-minute estimate uses 95% of mean test power. The ramp estimate applies a 75% convention to peak one-minute power. The five continuous training bands, anaerobic band and sprint reference are expressed relative to FTP.

Worked example

A 250 W 20-minute test gives 237.5 W FTP. At 75 kg this is about 3.17 W/kg.

Using your result

Use the protocol intended for your test type and the same calibrated device for repeat tests. Power shows external work while heart rate reflects your response. A hard test is demanding, so seek guidance if you are returning to exercise or unsure about readiness.

Compare tests on the same equipment

Enter average power for a sustained 20-minute test and the best full minute for a ramp test. Do not enter a short peak as if it were the full test average. If you already have an FTP from a coach or a training platform, choose Known FTP to see the corresponding table.

Apply the zones

The endurance and tempo ranges are expressed as watts so you can compare them with a trainer or power meter. Treat the boundaries as approximate. Sprint power depends on the athlete and the length of the effort, so its row is an open-ended reference.

Frequently asked questions

Why do my ramp and 20-minute results differ?

The tests emphasize different abilities. Treat each result as a protocol-specific estimate.

Is watts per kilogram always the most useful figure?

It helps when comparing climbing power relative to mass. Absolute watts and aerodynamics also matter.

Sources

Prepared by Fitness Moves. .

Related tools