Barbell Plate Calculator

Find which plates go on each side of a barbell in kg or lb, with nearby alternatives and a warm-up ladder.

How it works

Subtract the weight of the bar and both collars, then divide the remainder by two. The tool searches the selected denominations and chooses a combination with the fewest plates at a reachable weight.

Worked example

For a 100 kg target with a 20 kg bar and no collar weight, load two 20 kg plates on each side if you have four in total.

Using your result

Choose denominations you actually have, check the printed bar and collar weights, and use the same plates on both sides. The calculator assumes enough pairs of each denomination for the result. Enter a lower load if your rack does not have them.

Count what is attached to the bar

Include the empty bar and both collars in the total. For a target of 100 kg and a 20 kg bar, the plates together weigh 80 kg. If each collar weighs 2.5 kg, the plate requirement becomes 75 kg total, or 37.5 kg per side.

Choose between nearby totals

If a combination cannot hit your target, the main result shows the lower available total and the table shows the next higher load. Use the lower option when you are rounding warm-up loads. Check the actual plate inventory before lifting and load both ends evenly.

Frequently asked questions

Can I mix kilograms and pounds?

Convert your numbers first and choose a consistent unit for the calculation. A 45 lb bar is about 20.4 kg.

Why are alternate totals shown?

Your selected denominations may not make the exact target.

Sources

Prepared by Fitness Moves. .

Related tools